Self-aligning Ball Bearings

PRODUCT
7000AC Series

7000AC Series

Angular contact bearing balls (type 70000 AC) with α=25°, are inseparable and can only bear the axial force of one side, and the shoulder heights on both sides of the inner and outer rings are different, so more steel balls can be loaded to improve the bearing capacity. Mainly used in a wide range of industries such as automobiles, electrical equipment, machine tools, and aircraft.

NA, NKI Type

NA, NKI Type

There is an inner ring NA.NK type needle roller bearing. Since the inner ring has no rib, the inner ring, outer ring, a full set of needle rollers and cages can be installed separately, and the axial displacement of the shaft or housing is not restricted. Since the needle rollers are separated by a cage, the friction is reduced, so it can be used in parts with high rotation speed.

Thrust Spherical Roller Type 29000

Thrust Spherical Roller Type 29000

Spherical roller thrust bearings have specially designed raceways and asymmetrical rollers. The bearings can accommodate axial loads acting in one direction and simultaneously acting radial loads. The load is transmitted between the raceways via the rollers at an angle to the bearing axis, while the flange guides the rollers .

6200 Series

6200 Series

Single row deep groove ball bearing is the most representative structure of rolling bearings and has a wide range of uses. The raceways located on the inner ring and the outer ring have an arc cross section with a radius slightly larger than the radius of the rolling ball. In addition to bearing radial load, it can also bear axial load in two directions. Low friction torque, most suitable for applications requiring high speed rotation, low noise and low vibration. This kind of bearing, in addition to the open type, also has a bearing with a steel plate dust cover, a bearing with a rubber seal, or a bearing with a snap ring attached to the outer diameter of the outer ring. Generally, steel stamping cages are used. Mainly applicable cage: steel stamping cage (wave shape, crown shape...single row; S shape...double row)