Precautions for bearing storage

Release time:

2023-09-08

In contact with corrosive chemical media, the bearing is not cleaned cleanly, there is dirt on the surface, or the bearing is touched with sweaty hands. After the bearing is cleaned, it is not packaged or installed in time, and it is exposed to the air for a long time, and is attacked by air moisture and contamination; contamination

(1) Intruded by moisture, dirt, etc. due to poor sealing device;
(2) The bearing is not used for a long time, beyond the anti-rust period, and lacks maintenance.
(3) The metal surface has large roughness;
(4) In contact with corrosive chemical media, the bearing is not cleaned cleanly, there is dirt on the surface, or the bearing is touched with sweaty hands. After the bearing is cleaned, it is not packaged or installed in time, and it is exposed to the air for a long time, and is attacked by air moisture and contamination; contamination
(5) Ambient temperature and humidity and exposure to various environmental media; rust inhibitor failure or quality does not meet the requirements.

LATEST NEWS

Precautions for bearing storage

In contact with corrosive chemical media, the bearing is not cleaned cleanly, there is dirt on the surface, or the bearing is touched with sweaty hands. After the bearing is cleaned, it is not packaged or installed in time, and it is exposed to the air for a long time, and is attacked by air moisture and contamination; contamination

2023-09-08

How to choose bearing lubricant?

Lubricant is an essential and necessary condition for the bearing to operate. It is an important adjustment to reduce bearing wear and improve bearing life. The lubrication methods of imported bearings can be divided into grease lubrication and oil lubrication. Different imported bearings have different uses. The method and the lubrication method used are also different. The following Demerui Bearing will share with you the influence of the choice of imported bearing lubricants on the bearing.

2023-09-08

Thrust Ball Bearings 2026 Guide: Selection, Performance, Real-World Use Cases

This 2026 comprehensive guide breaks down everything you need to know about thrust ball bearings, from core design principles and load-bearing capabilities to optimal selection workflows, maintenance routines, and real-world application performance. Drawing on 12+ years of hands-on manufacturing experience at Keyike Machinery, we share tested data on temperature limits, speed ratings, and failure prevention strategies to help engineering teams reduce downtime, extend component service life, and make cost-effective sourcing decisions for demanding operating environments.

2026-10-29

Thrust Ball Bearings 2026: Selection, Installation & Performance Guide

This 2026 evidence-based guide to Thrust Ball Bearings is built on 14 years of Keyike Machinery manufacturing experience, independent lab test data, and global industry engineering consensus. It covers core design principles, performance tradeoffs, verified installation workflows, common failure troubleshooting, and practical selection frameworks to help engineers, procurement teams, and maintenance specialists reduce downtime, optimize load efficiency, and avoid costly specification mismatches across high-axial-load applications.

2026-10-29

2026 Complete Guide to Thrust Ball Bearings: Selection, Performance & Use Cases

This 2026 comprehensive guide covers core design principles, data-driven selection steps, real-world performance benchmarks, and maintenance best practices for thrust ball bearings. Drawing on 18 years of hands-on manufacturing expertise from Keyike Machinery, the content helps engineers reduce downtime, optimize bearing life, and make informed procurement decisions for industrial equipment.

2026-10-22

Thrust Ball Bearings: 2026 Complete Guide to Selection, Performance & Maintenance

This expert 2026 guide draws on 12+ years of hands-on manufacturing and field service experience from Keyike Machinery to demystify thrust ball bearing fundamentals, performance metrics, selection processes, installation best practices, and common failure modes. It balances peer-reviewed industrial research with real-world case data to help engineering teams optimize bearing lifecycle and reduce operational costs.

2026-10-22