CONTACT US

+86 18930038879

Mobile

+86 18930038879

Whatsapp

+86 15069120731

Whatsapp

Four Row

Four Row

Four-row tapered roller bearings have spacers for adjusting the clearance between the inner and outer rings. The performance is basically the same as that of double-row tapered roller bearings, and the bearing capacity is large. They are used almost exclusively in work roll applications such as rolling mills.
SEE MORE
Double Row

Double Row

Double row tapered roller bearing, the bearing has one outer ring and two inner rings, and there is a spacer between the two inner rings. The clearance can be adjusted by changing the thickness of the spacer. It can bear radial load and bidirectional axial load at the same time. Double row tapered roller bearings are typically used in gearboxes, hoisting equipment, rolling mills and machines in the mining industry, e.g. tunnelling machines.
SEE MORE
NU10xx EM Series

NU10xx EM Series

NU Series are non-locating, single row Cylindrical Roller Bearings with cage. The inner ring is separable and without flanges on their side of the roller.EM Series, which combines the strengths and technologies of previous cage designs into a one-piece brass roller-guided cage which achieves lower temperature running and quieter operation.High strength and wear resistant cage and High load rating.
SEE MORE
NU2xx & NU3xx Series

NU2xx & NU3xx Series

NU Series are non-locating, single row Cylindrical Roller Bearings with cage. The inner ring is separable and without flanges on their side of the roller which slides in both directions and is commonly found in motors.
SEE MORE
NF Series

NF Series

Single row cylindrical roller bearings NF type has a single rib on the outer ring, and two ribs on the inner ring.Can receive single direction axial loads.Much like the NJ bearing, these bearings possess some thrust load capability.
SEE MORE
< 1...9101112 >