CONTACT US

+86 18930038879

Mobile

+86 18930038879

Whatsapp

7000AC Series

7000AC Series

Angular contact bearing balls (type 70000 AC) with α=25°, are inseparable and can only bear the axial force of one side, and the shoulder heights on both sides of the inner and outer rings are different, so more steel balls can be loaded to improve the bearing capacity. Mainly used in a wide range of industries such as automobiles, electrical equipment, machine tools, and aircraft.
SEE MORE
5300E Series

5300E Series

Large Angular Contact Ball Bearing - Open, Double Row Two types of contact angles can be selected according to the magnitude of the axial load and moment load. Similar to single-row deep groove ball bearings, with a seal (2NS) and shield (ZZ) attached. Can be used on Blower, High-speed vacuum pump receiver, Supercharger and Two-wheeled vehicle transmission
SEE MORE
3300 Series

3300 Series

3300 series double row angular contact ball bearings are non-separable and have a ball-loading notch on one side. It can bear large radial and axial bidirectional combined loads and moment loads mainly based on radial loads. It can limit the bidirectional axial displacement of the shaft or housing, and has better rigidity than single-row bearings. Bearings are available in open and sealed designs. Sealed bearings are maintenance-free and thus allow economical bearing arrangements.
SEE MORE
3200 Series

3200 Series

Double row angular contact ball bearings correspond, in their design and operation, to a pair of single row angular contact ball bearings in a back-to-back arrangement, while requiring less axial space. They can operate at high speeds and are more suitable than deep groove ball bearings for supporting large axial forces in both directions.
SEE MORE
7400D Series

7400D Series

29° contact angle "D" indicates a duplex ground half pair matched with an identical half pair and is followed by an additional suffix letter to describe the type of duplex.
SEE MORE
< 12 >