CONTACT US

+86 18930038879

Mobile

+86 18930038879

Whatsapp

6200 Series

6200 Series

Single row deep groove ball bearing is the most representative structure of rolling bearings and has a wide range of uses. The raceways located on the inner ring and the outer ring have an arc cross section with a radius slightly larger than the radius of the rolling ball. In addition to bearing radial load, it can also bear axial load in two directions. Low friction torque, most suitable for applications requiring high speed rotation, low noise and low vibration. This kind of bearing, in addition to the open type, also has a bearing with a steel plate dust cover, a bearing with a rubber seal, or a bearing with a snap ring attached to the outer diameter of the outer ring. Generally, steel stamping cages are used. Mainly applicable cage: steel stamping cage (wave shape, crown shape...single row; S shape...double row)
SEE MORE
Flange Bearings

Flange Bearings

Flange bearings are among the ultra-small bore miniature bearings, which can be divided into ZZ steel plate bearing dust cover series, RS rubber bearing sealing ring series, flange plate series, stainless steel series, ceramic ball series, etc. The miniature ball bearings have a wide range of uses. Suitable for products requiring high-speed rotation, low friction torque, low vibration and low noise.
SEE MORE
One Way Bearing

One Way Bearing

One-way bearing is a bearing that can rotate freely in one direction and lock in the other direction.Type CSK is a sprag type freewheel integrated into a 62 series ball bearing (except sizes 8 and 40). It is bearing supported, delivered grease lubricated and protected against dust of more than 0,3 mm. the working temperature exceeds 50°C.
SEE MORE
Double Row

Double Row

Double row deep groove ball bearings are very suitable for bearing arrangements where the load carrying capacity of a single row bearing is inadequate. The design of double row deep groove ball bearings is basically the same as that of single row deep groove ball bearings. The deep groove ball shaft-shaped raceway plus the excellent tightness between the raceway and the steel ball.For the same bore and outside diameter, double row bearings are slightly wider than single row bearings in the 62xx and 63xx series, but have a considerably higher load carrying capacity. Double row deep groove ball bearings are only available as open bearings (without seals or shields).
SEE MORE
6800 Series

6800 Series

Thin-walled deep groove ball bearings have a simple structure and are easy to use. It is mainly used to bear radial load, and can also bear radial load and axial combined load at the same time. This series of bearings is suitable for places where the load and assembly shaft are relatively large and the space is restricted.
SEE MORE
< 12 >